1, Helix angle 35 ¡ã Cutting edge with a large eccentric design, cutting resistance is moderate, the material to be processed materials and hardness adaptable, widely used in mold and product processing, there is a higher cost.

2, Using the best of silicon, aluminum, titanium nano-coating, wear resistance than conventional aluminum titanium improved 10-20%.

3, Adapt cutting materials

A3, S45C, S50C, 40Cr, 42CrMo, 20Cr, Cr12, H13, NAK80, 718 other carbon steel, alloy steel, cast steel, cast iron, tool steel, hardened steel, titanium alloys.

4, Adapt processing Hardness

HRC60 ¡ã The following are processing tool cutting efficiency and lifetime best performance.

5, General cutting parameters

Cutting speed: Vc = 130m (120-180m) min

Depth of cut: Ap = 1/3D (1/8-1/2D)

Cutting width: Ae = 1/2D (1/4-1/D)

Single-blade feeding: Fz = 0.15mm (0.02-0.2)

Be processed in accordance with the different materials and hardness, cutting parameters to make the appropriate adjustments.
 

Packing

 1. One plastic pipe pack one piece, 10 pieces per group.

 2. Other packing will be accept according to your needs.